TESEQ CSP 9160A 電流傳感探頭

TESEQ CSP 9160A 電流傳感探頭

應用廣泛 頻率范圍：10 kHz～100 MHz大線徑直徑為25.4 mm在500 kHz～100 MHz之間變換系數為0dB

產品特點： CSP 9160 是一款寬頻RF電流傳感探頭，可用于檢測穿過導體的RF電流和線纜線束。 技術參數：頻率范圍： 9kHz ~ 200MHz插入損失：34 dB ±2 dB (50 Ω系統, 100 kHz-120 MHz)轉移阻抗： 1Ω插入阻抗：<1ΩRF 接頭： BNC大AC電壓或AC電流峰值(高至60Hz)：50A操作溫度: 0°C to +40°C相對濕度: 90%尺寸(L x H x W): 105 x 80 x 38mm重量: 約525 g包裝箱尺寸: 260 x 70 x 210mm重量: 約350 g

The CSP 9160A is a broadband RF current sensor probe as defined in CISPR 16-1-2. Beside the compliance measurements of asymmetrical disturbance currents as e.g. required in CISPR 16-2-1 and CISPR 22, the probe can be used in a number of diagnostic applications to measure superimposed RF currents flowing in conductors, or cable harnesses. A convenient feature of the CSP 9160A is that, from 100 kHz to 120 MHz, it has a flat frequency response with a 0 dB transducer factor, allowing voltage measurements to be read as current, directly without any correction. The probe can be easily and quickly clipped around the cable under test and the RF currents measured using an oscilloscope, spectrum analyzer, or EMI receiver. Its large aperture (25.4 mm) can accommodate most cables and can handle power lines with currents up to 50 amps. The CSP 9160A is can also be used as current monitor for BCI testing as per MIL-STD-461 and various automotive standards.Frequency range: 9 kHz to 200 MHz Insertion loss: 34 dB ±2 dB (50 ? system, 100 kHz to 120 MHz) typical ±1 dB, see also the graphsTransfer impedance, transducer factor: as given in the graphsInsertion impedance:<1 ΩSignal output: BNC socketMax. signal current: 1 A Max DC current or peak AC current (up to 60 Hz): 50 AClassification: Indoor use onlyOperating temperature: 0°C to +40°C Storage and transport temperature: -10°C to +60°C Relative humidity: up to 90% (no moisture condensation)Window diameter (aperture): 25.4 mmDimensions (L x H x W) in mm: 105 x 80 x 38Weight: approx. 525 g Dimensions of the storage case in mm: 260 x 70 x 210Weight: approx. 350 gPart number Description 347-050 CSP 9160A Current sensor probe, 9 kHz to 200 MHz, CISPR 16-1-2, in storage case 97-347-050 CSP 9160A-TC Traceable calibration (ISO17025), order only with device CSP 9160A252075 PCJ 9160 Calibration jig for CSP 9160 348-345 CHA 9545 RF cable, BNC(m)-BNC(m), 3 m, RG223

TESEQ CSP 9160A 電流傳感探頭

深圳市美佳特科技有限公司（簡稱“美佳特"）成立于2010年，致力于光通訊測試、通用電子測量及5G測試服務。美佳特以“無線溝通，溝通無極限 "企業使命，業務聚焦于精密測試測量儀器的租賃、銷售、維護、計量及測試環境搭建等一站式服務。N2843A Keysight 無源探頭 Keysight 是德

主營產品：示波器主機和模塊、眼圖儀、光譜儀、信號源、頻譜分析儀、網絡分析儀、阻抗分析儀、光通信儀器、誤碼儀、光時域反射儀、可調諧激光源、光功率計、光衰減器等。合作品牌：安捷倫、是德、泰克、安立、愛得萬、安騰、力科、馬可尼（IFR）、R&S、EXFO等。N2843A Keysight 無源探頭 Keysight 是德

主推：Agilent 86100D/C 示波器,keysight M8195A 任意波形發生器,Anritsu MS9740B/A 光譜分析儀,YOKOGAWA AQ6370D/E 光譜分析儀,keysight N1092A/C 采樣示波器,keysight E8257D 模擬信號發生器,keysight E5071C 矢量網絡分析儀